xunit

Type int

Default value: 0       (the xunit value is not used when set = 0)

Allowed values:        10 – 300 mils

This may be used to specify the X unit dimension (ie. The width of the narrowest bar) in standard mil units (NOT mm. 1 mil = 0.001 inches). Barcode should not normally be produced with an X value smaller than 10, and MUST NOT be produced with an X value smaller than 8 - or the barcode will not meet the standard specification. This provides an alternative way of specifying the barcode size - rather than using the lpRect parameter.

When xunit is specified the length of the barcode is calculated within the DLL and the length implied by other parameters is ignored.

 

More:

string2