Xunit

Barcode2D.Xunit        the thickness of the thinnest bar in the barcode in Mils (thousandths of an inch).

Default value: 50      

Allowed values:          8 – 500 mils

This may be used to specify the X unit dimension (ie. The width of the narrowest bar) in standard mil units (NOT mm. 1 mil = 0.001 inches). Barcode should not normally be produced with an X value smaller than 10, and MUST NOT be produced with an X value smaller than 8 - or the barcode will not meet the standard specification.

 

More:

Yunit